• Choosing mixer models according to physical properties of mixing material, tech no logical conditi ons and mixing purposes.

• Determining motor power, mixing speeds and mixer diameters according to determined mixer models, flow patterns during mixing and technical control requirements of mixing time, sedimentation velocity and dispersity.

• Selecting determined speed reducer models from the speed reducer model table according to motor power, mixing speeds and technological conditions.

• Determine the number of agitator layers according to the size of the container or pool:1)、Gen erally, accordi ng to the height of the pool body (con tainer) / the diameter of the pool body (or length and width) is close to 1:1, select a layer of mixer; 2)、When the cell body (container) height / cell body diameter (or length to width) ratio is greater than or equal to 1.5:1, select a 2-layer mixer;3)、When the cell body (container) height / cell body diameter (or length to width) ratio is greater than or equal to 2.5:1, select a 3-layer mixer

• Calculation of mixing flow and motor power is a very important step:Generall, it is determined according to the need of strring intensity,and calculation software is used for calculation. In the specific calculation, parameters such as viscosity value, density, number of blade layers, and rotation speed are input.

• Selection of Seal Models of L iquid Mixers:1)、Under normal circumstances, it is not considered to set the sealing device;2)、Where there is sealing requirement, but the sealing requirements are not too high, the packing box sealing of PTFE packing is preferred;3) For the strict sealing requirements, the magnetic transmission static sealing structure can be used, that is, the magnetic drive (drive) mixer is selected.

Electroplating industrial park electroplating wastewater treatment case

Dahua New Energy Wastewater Treatment Case

Tongwei photovoltaic wastewater treatment case

Wastewater treatment case of Huaxi Smelter

Zhejiang Jushi Fine Chemical Wastewater Treatment Case

Sichuan Hebang Pharmaceutical Medical Device Wastewater Treatment Case

FLOWX staff meeting