You are here: Home / Products / Mixer Agitator / Paddle Mixers

PRODUCT DETAIL

This product is no longer available

Paddle Mixers

Name: Paddle Mixers
Brand: FLOWX
Rating: 5.0 (90 reviews)

The design and selection of the mixing device is closely integrated with the purpose of the mixing operation. In the design and selection, first determine the type of agitator, motor power, and mixing speed according to the purpose and requirements of the process for the mixing operation, and then select the reducer, frame, mixing shaft, shaft seal and other components.
The structure is simple, the footprint is relatively small, and the installation is convenient.
Suitable for mixing, homogenizing, blending, dissolving， heat transfer or crystallization of low viscosity liquids.

Availability:

Brand:
FLOWX
Code:
FLOWX-85269

Product Description

Frame Agitator

Helical Ribbon Agitator

FLOWX company main produce: Paddle Mixers

(Please contact us Get Free Quote Now. )

SELECTION METHOD

Choosing mixer models according to physical properties of mixing material, tech no logical conditi ons and mixing purposes.
Determining motor power, mixing speeds and mixer diameters according to determined mixer models, flow patterns during mixing and technical control requirements of mixing time, sedimentation velocity and dispersity.
Selecting determined speed reducer models from the speed reducer model table according to motor power, mixing speeds and technological conditions.
Determine the number of agitator layers according to the size of the container or pool:1)、Gen erally, accordi ng to the height of the pool body (con tainer) / the diameter of the pool body (or length and width) is close to 1:1, select a layer of mixer; 2)、When the cell body (container) height / cell body diameter (or length to width) ratio is greater than or equal to 1.5:1, select a 2-layer mixer;3)、When the cell body (container) height / cell body diameter (or length to width) ratio is greater than or equal to 2.5:1, select a 3-layer mixer
Calculation of mixing flow and motor power is a very important step:Generall, it is determined according to the need of strring intensity,and calculation software is used for calculation. In the specific calculation, parameters such as viscosity value, density, number of blade layers, and rotation speed are input.
Selection of Seal Models of L iquid Mixers:1)、Under normal circumstances, it is not considered to set the sealing device;2)、Where there is sealing requirement, but the sealing requirements are not too high, the packing box sealing of PTFE packing is preferred;3) For the strict sealing requirements, the magnetic transmission static sealing structure can be used, that is, the magnetic drive (drive) mixer is selected.

Paddle-Mixers

PRODUCT APPLICATION

Electroplating industrial park electroplating wastewater treatment case